![销售高质量全自动电脑型高速吸塑机]()
-
价格面议
- 产品简介：采用人机界面微电脑触摸屏控制系统，操作直观易用，维护方便简单
Using microcomputer touch screen man-machine interface control system, the operation is intuitive and easy to operate, convenient and easy maintenance
变频马达拉片控制，速度快，准，稳
Frequency conveion motor control feeding, fast, accurate and steady
加热炉模块控温，温度直接显示度数，准确探测到每一块加热瓦的温度
Heating furnace temperature control module, display the temperature degree directly, accurately detect the temperature of each piece of heating
自动报警功能，真正做到机电一体化
Automatic alarm function, truly electromechanical integration
震动脱模，多次底分反吹
Vibration demould.
电炉采用不锈钢制作，保温棉密封结构，有效防止热量散失
Electric furnace adopt stainless steel, heat preservation cotton sealing structure, effectively prevent heat loss.
主要应用：
PET,PS防静电电子周转托盘，PVC化妆品，日用品包装，PP,PET食品托盘等各行各业塑料外包装产品
PET, PS anti-static electronic revolving tray, PVC cosmetics, daily necessities packaging, PP, PET food tray and other external plastic packaging products....
-
上海怡友机电设备有限公司
2022-06-25
![出售**全自动厚片 板）吸塑机]()
-
价格面议
- 产品简介：工艺流程：上料-矫正-加热-成型-卸料五个工位
Technological process: feeding - correction - heating - molding - unloading, five steps
1上、下电炉均采用进口加热管，板材受热均匀，具有防垂及反吹功能，让制品壁厚*加均匀，对5毫米以上厚板材吸塑加工*凸显效果；
1 upper and lower electric furnace adopts imported heating tube, sheet(plate) heated evenly, has vertical and revee function, make products more uniform in wall thickness, especially for more than 5 mm thick plate blister processing has more prominent effect;
2、自动化程度高：PLC电脑控制，根据用户需要可选加储料室及自动上料装置，无需人工上料和取件，无需人工对版，减少不安全因素和劳动强度；
High degree of automation: PLC computer control, according to customer’s request the optional add the storage compartment and the automatic feeding device, no need for manual feeding and unloading, reduce uafe facto and the labor inteity;
3、能耗低:电炉均采用进口红外加热管，板材受热均匀，加热板升温快（2-3秒达到**温度），电炉推进时灯管自动开启，电炉退回后灯管自动关闭，减少不必要的电能损失，比其他吸塑机省电30%以上，采用**的数码功率控温，不受外网电压的影响，自动校正功率，较普通型综合节约30%电能
Low energy coumption: furnace adopts imported infrared heating tube, plate uniform heating, the heating plate heat up quickly (2-3seconds able to reach the temperature), lamp automatically open when the furnace propulsion, furnace tubes automatically shut down after furnace return, reduce unnecessary energy loss, 30% power save more than other forming machines. Adopting the advanced digital temperature control, power voltage is not affected by the network, automatic correction. Comparing ordinary machines our machine is saving 30% electricity;
4、换模成本低：自动无*活动模板窗，更换模具时，电脑操作需要任意调整纵横向的压料框，无需更换，托料板的长度方向也可做到调节，适应不同大小的模具，这样大大减少换模成本。窗，能有效调节各种尺寸模具
Low cost of moulds changing: automatic infinite activity template window, when you want to replace the mould, you can operate it by PC to adjust the outer frame (length and width is adjustable), to adapt the different sizes of mould, which is greatly save the cost of the mould changing. Window, it’s effectively regulate various size mold.
（ABS, PP, PS, PVC, EPS, HIPS, PE, HDPE, PC, PMMA, EVA, PETG, PETGAG）的热塑成型加工。在相应的模具中可制造生产：汽车内、外饰件，家用电器内胆，冰箱内胆，器械内胆，门板，灯饰，箱包，装饰用件，滑滑梯，家具，洁具，灯具，玩具，美术广告，标牌标识，交通标志，托盘衬垫（如：工业栈板）等各种材料的塑料制品
(ABS, PP, PS, PVC, EPS, HIPS, PE, HDPE, PC, PMMA, EVA, PETG, PETGAG) of thermoplastic processing. In the corresponding mold it can manufacture: iide and outside car decoration, household appliances liner, refrigerator inner line, door plank, lighting, bags, decorative accessories, children's slide, furniture, sanitary ware, lamps and lanter, toys, arts and advertising sig, traffic sig, tray liner (such as: industrial pallet) and various of materials such as plastic products....
-
上海怡友机电设备有限公司
2022-06-25
![出售高质量全自动翻转模杯盖碗成型机]()
-
价格面议
- 产品简介：1、此机由PLC控制并使用触摸屏。
This machine is controlled by PLC and the touch screen.
2、在送片装置和拉伸装置上使用伺服电机。
In the sheet sending device and teile device using servo motor.
3、此机全自动功能可帮助塑料产品厂家节省人力及降低生产成本。
This machine is fully automatic and it can help plastic products manufacturer to save manpower and reduce the production cost.
4、此机的**可适用于**生产线。
This machine is very quickly and suitable for advanced production line.
5、该设备具有模具记忆功能
This machine has mould memory function.
适用于PP、PS、HIPS、PVC、PET、PLA等塑料片材成型，生产各种杯、碗、碟、盖、盒等制品如：牛奶杯、果冻杯、一次性饮料杯，方便面碗。生产过程是通过加热塑料片材至一定温度，用正压成型制杯，然后由翻转装置输送至叠杯机进行自动堆叠、计数、整齐推出
Apply to PVC, PET, PP, PS, HIPS, PLA plastic sheet forming, such as the production of various kinds of cup, bowl, dish, cover, box products such as: milk cup, jelly cup, disposable drink cup, Bowl of itant noodles. The production process is the plastic sheet by heating to a certain temperature, with positive pressure forming, and then by the turn-over device send to cup stacking , counting, and tidy sending out....
-
上海怡友机电设备有限公司
2022-06-25
![销售高质量全自动正负压三工位吸塑机]()
-
价格面议
- 产品简介：电热炉温控系统采用全电脑智能自动补偿控制，分区一控一采用数字输入、具有微调精度高、温度均匀、升温快（从0-400度只需3分钟），稳定（不受外部电压影响、温度波动不*过1度）。能耗低（节能15%左右），热炉使用寿命长等特点。
The electrothermal furnace' s temperature control system adopts full computerize intelligent automatic compeation controlling, individual partition adopts digital input, has a high precision fine-tuning, temperature uniformity, fast temperature elevation(only 3 minutes from 0-400 degrees), stability (not influenced by external voltage, temperature fluctuation is less than 1 degree). Low energy coumption (energy saving about 15%), electrothermal furnace service life is long, etc.
集成型，冲剪，堆叠，计数为一体
Integrate forming, cutting, stacking and counting
目前较**的凸轮结构（配有SKF轴承）
At present the most advanced CAM structure (equipped with SKF bearings)
电炉移动方式灵活（前后左右可移动）适用于*小版面产品
Movable electric furnace (all around moving), suitable for the smaller products.
边角料自动收卷；
Leftover material automatic recycle.
送片链轨宽度可同步或分立电动调整；
The width of feeding caterpillar track can be adjust individual or controlled by motor.
电热炉自动移出装置；
Electric furnace is removable from the device automatically;
吸塑机机械上料卷装置，减轻工人劳动强度
Automatic feeding devices, save labor inteity.
主要应用：
Application:
常用材料有PVC、PET、APET、PETG、PP、PE、PS、EPS、EPOS、淀粉降解材料、光电降解材料、植绒材料等。广泛使用于食品、五金、电子、文具、医疗用品、日用品、化装品、工艺品、玩具用品等多种行业产品的大量生产。
Commonly used material such as PVC、PET、APET、PETG、PP、PE、PS、EPS、EPOS、Starch biodegradable materials, Photoelectric biodegradable materials, Flocking material etc. Widely used in food, hardware, electronics, stationery, medical supplies, daily necessities, cosmetics, handicrafts, toys, and other industry products of mass productio...
-
上海怡友机电设备有限公司
2022-06-25
![恒纬全自动正负三/四工位吸塑机]()
-
价格面议
- 产品简介：电热炉温控系统采用全电脑智能自动补偿控制，分区一控一采用数字输入、具有微调精度高、温度均匀、升温快（从0-400度只需3分钟），稳定（不受外部电压影响、温度波动不*过1度）。能耗低（节能15%左右），热炉使用寿命长等特点。
The electrothermal furnace' s temperature control system adopts full computerize intelligent automatic compeation controlling, individual partition adopts digital input, has a high precision fine-tuning, temperature uniformity, fast temperature elevation(only 3 minutes from 0-400 degrees), stability (not influenced by external voltage, temperature fluctuation is less than 1 degree). Low energy coumption (energy saving about 15%), electrothermal furnace service life is long, etc.
集成型，冲剪，堆叠，计数为一体
Integrate forming, cutting, stacking and counting
目前较**的凸轮结构（配有SKF轴承）
At present the most advanced CAM structure (equipped with SKF bearings)
电炉移动方式灵活（前后左右可移动）适用于*小版面产品
Movable electric furnace (all around moving), suitable for the smaller products.
边角料自动收卷；
Leftover material automatic recycle.
送片链轨宽度可同步或分立电动调整；
The width of feeding caterpillar track can be adjust individual or controlled by motor.
电热炉自动移出装置；
Electric furnace is removable from the device automatically;
吸塑机机械上料卷装置，减轻工人劳动强度
Automatic feeding devices, save labor inteity.
主要应用：
Application:
常用材料有PVC、PET、APET、PETG、PP、PE、PS、EPS、EPOS、淀粉降解材料、光电降解材料、植绒材料等。广泛使用于食品、五金、电子、文具、医疗用品、日用品、化装品、工艺品、玩具用品等多种行业产品的大量生产。
Commonly used material such as PVC、PET、APET、PETG、PP、PE、PS、EPS、EPOS、Starch biodegradable materials, Photoelectric biodegradable materials, Flocking material etc. Widely used in food, hardware, electronics, stationery, medical supplies, daily necessities, cosmetics, handicrafts, toys, and other industry products of mass production....
-
上海怡友机电设备有限公司
2022-06-25
